Metal Rolling Equipment

We are availing to the customers this range of best quality Metal Rolling Equipment. The offered range has been made from the best quality raw material and is availed to the customers from various industries in the most comprehensive and industry leading prices. Basically this machine is a combinations of both pressing and punching metal sheets. Our range is easy to customize as per the client needs and is made from guaranteed quality raw material. All the standard predefined industrial configurations have been taken care of while processing this range.

Deburring Unit

REQUEST CALLBACK

Click to Zoom

Get Best Quote

Approx. Rs 3.25 Lakh / Number Get Latest Price

Product Details:

Minimum Order Quantity	1 Number
Vertical movement	By pneumatic cylinder
Coil Weight	3 MT to 20 MT
Coil Width	450 mm to 1300 mm Max.
Thickness	0.3 mm to 4 mm
Lateral adjustment	Manual / motorized
Suitable for	CR / brass / Copper coils
Automatic Grade	Semi-automatic

We manufacture Deburring Unit for slitting lines and edge trimming lines. Burrs are mashed by alloy steel hardened ground rolls. The machine is designed as per the material specifications and other requirement of the client. Full barrel length roll is used in bottom to support maximum width coil. In case of slitting line, bottom and top rolls are same. But in case of edge trimming line two top rolls of very small barrel length are used. They can be laterally adjusted over the edges of the strip.

Yes! I am Interested

Scrap Winder

REQUEST CALLBACK

Click to Zoom

Get Best Quote

Approx. Rs 64,000 / Number Get Latest Price

Product Details:

Minimum Order Quantity	1 Number
Maximum scrap width	25 mm
Max Coil Thickness	8 mm
Scrap bundle weight	100 kg to 450 Kg
Min Coil Thickness	0.04 mm
Type	Single / dual type
Automatic Grade	Automatic

We are offering a wide range of Scrap Winder (Scrap Baling). Scrap Winder is a taper drum of welded steel construction supported on a solid steel shaft running in grease lubricated roller bearings. The winder drum shaft is driven either by geared motor with unidirectional clutch arrangement or by hydraulic motor. To ensure an even build-up of scrap on the drum, an oscillating scrap guide is incorporated on optional basis. The scrap bundle from the winders drop into a trough below the winders.

Yes! I am Interested

Recoiler Machine

REQUEST CALLBACK

Click to Zoom

Ask Latest Price

Product Price: Get Latest Price

Product Details:

Drive	AC VFD / DC Motor
Coil ID Range	400, 508 mm or 600 mm
Max Coil Width	1650 mm
Coil Weight	500 Kg. Min. to 35 MT Max.
Max Coil Thickness	7 mm
Min Coil Thickness	0.2 mm
Min Coil Width	250 mm
Automatic Grade	Automatic , Semi-Automatic

We are considered as an authentic Manufacturer, Supplier, and Exporter of Recoiler Machine (Industrial Recoiler). Models are designed according to the customer requirement. The unit is provided with or without over arm separator, pusher arrangement and in built gearbox.

Features:

Expand / Collapse : By manual screw and nut arrangement
By axial movement of wedges actuated by rotating hydraulic cylinder
Coil Removal : By hydraulic cylinder operated pusher plate

Yes! I am Interested

*Your information is safe with us.

Pinch Roll Unit

REQUEST CALLBACK

Click to Zoom

Ask Latest Price

Product Price: Get Latest Price

Product Details:

Max Coil Width	2000 mm
Min Thickness	0.5 mm
Suitable for	CR & HR coils / sheets
Coil Weight	Up to 35 MT Max
Speed	5 MPM to 100 MPM constant / variable (Application based)
Max Thickness	20 mm
Min Coil Width	100 mm

We manufacture Pinch Roll Unit for various applications. The units are available as per the material specifications and other requirement of the client. The unit has two rolls supported in anti friction bearings duly mounted in chokes. One of the rolls is fixed at pass line while the other one can be raised and lowered by suitable mechanism. Rolls are driven to feed the coil end / plate as per the requirement.

Features:

Vertical movement : Hydraulic cylinders / Pneumatic cylinders
Drive : AC Geared motor / DC Motor with GB / hydraulic motor
Type of Drive : Both rolls driven by pinion stand / single roll driven

Yes! I am Interested

Stacker Machine

REQUEST CALLBACK

Click to Zoom

Ask Latest Price

Product Price: Get Latest Price

Product Details:

Max Strip Thickness	20 mm
Min Length of Sheet	500 mm
Stack Weight	Up to 5000 kg
Material	Cast Iron, Steel
Surface	Galvanized
Min Strip Thickness	0.5 mm
Max Length of Sheet	10000
Type	Drum Stacker

We are leading manufacturer, supplier and exporter of Drop Stacker Machine for Cut to length lines. Our range of stacker varies from simple stacking table to Dropping Arm stacker. Stacking table is designed to accommodate maximum length of sheet. Table is gradually lowered by hydraulic cylinders / motorized arrangement either by manual control or by auto programming. Dropping arm design ensures perfect stacking of cut sheets without any scratch / damage to the surface of the sheets.

Yes! I am Interested

Decoiler Segment

REQUEST CALLBACK

Click to Zoom

Ask Latest Price

Product Price: Get Latest Price

Product Details:

Finish	Polished
Surface	Galvanized
Power	Electric
Mandrel Material	Cast Iron
Size	Medium
Material	Cast Iron, Seamless pipe

We are offering a wide range of Decoiler Segment (Decoiler) to our clients. Segment are either constructed from cast steel or from seamless pipe as per the application. They are bolted on the mandrel to increase its diameter. Sliding segment are also manufactured for narrow width coil. This makes the segment change very easy and quick.

Yes! I am Interested

*Your information is safe with us.

Mini Leveler

REQUEST CALLBACK

Click to Zoom

Ask Latest Price

Product Price: Get Latest Price

Product Details:

Min Coil Width	50 mm
Max Coil Width	250 mm
Finish	Polished
Max Thickness	7.0 mm
Suitable for	Steel / Brass / Copper coils
Min Thickness	0.5 mm

Mini Levelers are manufactured for Press Feeding Lines. Levelers are designed for precision coil strip flatness and shape correction before punching and drawing operation on the Power Press. Depending on the the strip thickness and width, Levelers are manufactured in different configuration.

Yes! I am Interested

Mini Shears Machine

REQUEST CALLBACK

Click to Zoom

Ask Latest Price

Product Price: Get Latest Price

Product Details:

Suitable for	Steel / Brass / Copper coils
Min Coil Width	50 mm
Max Coil Width	250 mm
Min Thickness	0.5 mm
Max Thickness	7.0 mm
Operation Mode	Semi-Automatic, Automatic

Mini Shears Machine are manufactured for Press Feeding Lines. They are normally used on the exit side of the Power Press to cut the punched strip coming out of Press in short pieces.

Yes! I am Interested

Slitting Machine

REQUEST CALLBACK

Click to Zoom

Ask Latest Price

Product Price: Get Latest Price

Product Details:

Max Strip Thickness	7.00 mm
Tension	0.5 Kg / Sq. mm to 4 Kg./Sq.mm
Min Strip width	200 mm
Min Strip Thickness	0.5 mm
Max Strip width	1650 mm
Finish	Polished
Material	Cast Iron, Steel

Tension Pads for Slitter (Slitting Machine) are used on the Slitting lines just before Recoiler unit to apply tension on the strip before winding. The unit consist of two fabricated housing pivoted one over the other. Rubber impregnated canvas hose pipe is placed between both the housings. Housings are clamped together by toggle clamp and tension is applied on the strip by supplying compressed air to the canvas hose. Tension can be adjusted as per requirement with the help of air pressure regulator.

Application:

Used to provide tension for slit

Yes! I am Interested

*Your information is safe with us.

Coil Peeler

REQUEST CALLBACK

Click to Zoom

Ask Latest Price

Product Price: Get Latest Price

Product Details:

Surface	Galvanized
Min Coil Thickness	1 mm
Max Coil Thickness	20 mm
Min Coil Width	100 mm
Max Coil Width	2000 mm
Material	Cast Iron, Steel

We are a leading manufacturer, supplier and trader of Coil Peeler. Peeler Table peels off the outer wrap of the coil loaded on UN-cooler and guides it to the Pinch roll unit. This is an extend-able table supported and pivoted from structural steel support. The extending and pivoting motion of the table are actuated by two hydraulic cylinders.

Yes! I am Interested

Turk Head

REQUEST CALLBACK

Click to Zoom

Ask Latest Price

Product Price: Get Latest Price

Product Details:

Max Strip thickness	7.00 mm
Min Strip thickness	1.00 mm
Surface	Polished
Type of Section	Square/ Rectangular / Channel / Open Lip / Closed Lip / "Z" Section
Automatic Grade	Semi-Automatic
Material	Cast Iron,Steel

We manufacture Turk Heads for Tube mill and section mill. The function of turk head is to remove twist from the formed section. The equipment has provision to move the Dies in all the three axis to correct the shape of formed section.

Application:

To remove Knot or Twist from Tube

Yes! I am Interested